Airbus and Boeing Instruction

LCD Installation (Left Panel Cutout)

Mount the Screws:
Insert the provided 4 screws into the designated holes in the left panel cutout.

Add Spacing and Secure Screws:
From the back of the panel, attach 4 nuts to the screws. This not only secures them in place but also provides necessary spacing for the LCD.

Position the LCD:
Align and insert the LCD onto the mounted screws from the back of the panel.

Secure the LCD:
Use 4 additional screws from the back to firmly attach the LCD in place.

WinWing Sim Glarewing Installation

Align Components:
Identify the cutouts on the panel designed for the WinWing Sim Glarewing. Align the holes on the Glarewing with the cutouts.

Attach the Glarewing:
Using the screws and nuts included with the Glarewing, insert the screws through the aligned holes and secure them from the back of the panel.

WinWing Boeing Autopilot Panel (AP3) Installation

Locate the Mounting Holes:
Use the pre-drilled holes in the panel for the AP3 Sim Panel.

Mount the AP3 Panel:
Attach the AP3 panel from the back of the panel using the screws provided.

Stream Deck XL Installation

Prepare the Panel:
Place the Stream Deck XL between the two adapter plates. The panel has holes specifically for mounting the Stream Deck.

Insert Screws:
Insert 4 black screws into the Stream Deck mounting holes on the front of the panel.

Install First Adapter Plate:
From the back, place the first adapter plate (the one with the wider cutouts) over the screws and secure it with 4 nuts.

Insert Stream Deck:
Slide the Stream Deck XL into the mounted adapter plate from the back of the panel. Hold it in place manually.

Secure with Second Adapter Plate:
Place the second adapter plate on the back side of the Stream Deck.

Final Securing:
Insert 4 more nuts from the back to lock the Stream Deck and the second adapter plate in place.

How to Pop Out Avionics in MSFS

  • Start Microsoft Flight Simulator and load your flight.
  • Once in the cockpit, hold the Right ALT key.
  • While holding Right ALT, click on the avionics display you want to pop out.
  • The selected display will open in a separate window.
  • Drag the window to your panel or monitor.
  • Align and resize it to your preference.